That would be the scratch resistant coating or the anti reflection coating coming off, not the UV coating. Keep your eyes feeling fresh on digital devices and computers by investing in specific blue-blocking AR coatings… I feel ripped off (again!!!) If there was no anti reflection coating on it, … Messed it up even more by trying to polish it off with a dremel and now there's uncoated glass showing here and there. These Lenses’ Coating Can Peel-Off Easily Which Effects Children’s Eyes 4. I don't have access to an optician right now and I am super short sighted (about -10 on both eyes) I don't know what I can do. Removing Teflon non-stick coating from Visions and Pyrex Glass Cookware. These coatings allow beneficial blue light through to your eyes and reduce reflections and unwanted glare. This coating consists of a thin layer of fluoropolymer-based solids (similar to Teflon) that is bonded to the glass.. Over time and use, this coating will wear off, and you may notice parts of the screen getting greasy or dirty with fingerprints more easily. As accepted in antiques collecting circles, flashed on pieces have a light stain that was applied to the surface of a clear glass base. Unlike anti fog sprays that have to be constantly applied, FOG OFF is embedded into the anti reflective coating process when your eye glasses are made. Take them back to the same store and get them to replace the lenses for free. I do see an increased frequency in buying new glasses, as the coating wears off. Anti-reflective coatings can be applied to the back of sunglass lenses 2. If the oleophobic coating is still there, the line will erase itself, as the marker's trail breaks up and forms many little dots, which can be wiped off the screen; if the coating is gone, the line will stay on the glass (as you can probably imagine, we don't recommend this test, but you can do it for research purposes if you happen to have an old device lying around). DON'T use your shirttail or other cloth to clean your glasses, especially when the lenses are dry.This can scratch your lenses. That’s why it’s a good idea for young children to postpone having them, unless they have specific needs in which an anti-reflective coating would be beneficial. The peeling tint should be anti scratch coating or other coating. Remove Anti Reflective Coating From Glasses. Modern smartphones feature an oleophobic (oil-repellent) coating that protects the screen, improves smoothness, and reduces fingerprints. A common problem with prescription glasses and sunglasses is called back-glare.This is light that hits the back of the lenses and bounces into the eyes. If they refuse, don't shop there anymore. The purpose of an anti-reflective (AR) coating is to reduce these reflections off the lenses. I've actually tried polishing the coating off a pair of lenses because they were becoming so cloudy. LensCrafters said they would replace the lens for 200.00. LensCrafters has lost all of my family's business. Disambiguation: Letter 34155, "Removing Teflon non-stick coating from [METAL] pots & pans" Current question and answers: March 10, 2021. I let my eye glass store talk me into plastic lenses with anti glare and anti scratch coatings (again!!!) In addition, most manufacturers of AR coatings will test their lenses with thousands of rub cycles back and forth to make sure the lens will stand up to cleaning and wear and tear. Since I was still eligible for free repair under Apple’s Anti-Reflective Coating Repair Program, I did not hesitate. Your weather has nothing to do with it. Glasses coating peeling off -- HELP! I don't know if I should keep going to get rid of all the coatings. The coating dissolved completely. Like Standard AR coatings BluBlock AR coatings look nicer by being less reflective. Some of the kids ma stick the coating from their mouths out of interest, which could lead to serious health issues. 1 decade ago. Remove the glasses and repeat with another layer of wax, if desired. It seemed there was no getting away from them even after I had taken the glasses off. I always cleaned the display with a mildly damp black cloth (i.e. Considerations and Warnings. Before microscopic picture of damaged coating is … Fast forward to 2016, the new anti-glare coating started to peel off again, but this time partially due to my own fault. the one you get when you buy a MacBook). ... ↑Anti scratch or anti reflective coating is coming off. The anti-glare coating on the screen slowly started to peel off and Apple agreed to change the display for me in 2015. Since it took 3 weeks to get it back, I made sure to do my best in order to prevent this issue from coming back in the future. Removing the flaking coating from the eyeglasses needs to be done carefully but it is usually a simple process. Getting stains off your eyeglasses can be difficult, especially if you are worried about damaging your spectacles. This usually happens to lenses that come into contact with skin oils, such as open framed glasses like half jackets. Footprintz. Poor customer service and they should have told me that it would rub off. It is not uncommon for this coating to start flaking off of the glass as the lenses age, thereby resulting in an uneven look on the glass. Transition lens, unlike other tints, won't peel off. Coatings that are applied to the outside of lenses are more likely to peel, scratch or wear off. I have been wearing glasses for 50 years, and AR for just the last five or so. You may try to spit on them or use your shirt to clean them, but this is not recommended as it often does not work and may end up damaging your glasses permanently. Sometimes happens but shouldn't within a year. Now take this to 10 or 15 lens inside your lens and each has 2 surfaces you will lose a lot of light, also the lost light will casuse problems (haze, flare and others) Coating of lens goes back to WWII, it was a big thing on the range finders for big guns. The glasses cost me over 400.00 less than 1 year ago. I just rinsed it off and it was like new (except for scratches that had gone all the way into the plastic substrate). In bad cases, you can … They do this to varying degrees but the latest coatings work especially well at reflecting off blue light from the critical range of 415nm to 450nm. Anti-reflective coating has been a great development in eyeglasses, but it certainly doesn't feel that way when it gets scratched. They look beautiful and I will get another year of use out of the lenses. The lenses in my favorite pair of glasses are getting to be about a year or two old, and it’s getting to the point where I can barely see through them. Answers (2) Jerry. So if you are staying away from an Anti-Reflective lens coating because you are afraid it is going to rub off, then you are staying away for the wrong reason. The glass is not scratched but it appears that way because the coating is coming off. The best way to prevent this from happening again is to keep your lenses clean. What a terrible company. Sometimes the eyeglass lens or coating can be scratched no matter how careful you are. These scratches can occur from using the wrong materials to clean the glasses, by dropping the glasses or through just about anything that brings eyeglass lenses in contact with a surface. FOG OFF is a premium anti fog coating for eye glasses and is part of the anti reflective coating that is applied to eye glasses. The process depends on whether the glasses have plastic or glass lenses. Luckily, there is a quick fix that you can perform with easily-found household items. You Might Have To Pay More The anti-reflective coating is whats peeling off of your lens. I used Drano and let it sit for three days and the coating peeled off. Remove the coating altogether if the lenses are so badly scratched that the wax fails to adequately remedy the situation. My prescription hasn’t changed much – the problem is that the UV filter coating is starting to wear off, giving the entire lens surface a rough, partially-opaque finish. I can't say that I see any advantage in AR as far as clarity and less eyestrain. Therefore, this also counts as a ma*sive disadvantage among the various pros and cons of anti-glare lenses. These micro-thin layers consist of zirconium-dioxide, titanium-dioxide, aluminum-oxide or silica dioxide. I've never had problems with it coming off and I certainly don't replace the glasses more than every two years at bests posted by koahiatamadl at 4:58 PM on January 13, 2017 just because tempered glass lenses would have cost an additional 60 dollars. I had a large Vision pot with the coating. By applying anti reflective coating to the front and back of an eyeglass lens we can reduce the amount of glare that reflects off the surface of the lens. When I was done, I noticed the lense coating peeling. The reflection may be gone, but the scratch is all that you can see. With crown glass (Uncoated) you will have about a 4% reflected off the surface of the glass, this is due to the mismatch of the IR. DON'T use saliva to wet your lenses.. DON'T use household glass or surface cleaners to clean your eyeglasses.These products have ingredients that can damage eyeglass lenses and coatings, such as anti-reflective coating. The base glass is sometimes thinner and lighter in weight than true red or cranberry pieces made in the late 1800s and early 1900s. I was told by the one optomeristist where I bought my glasses that the coating had worn off & they will repair them ten minutes later I was told by another optomertrist they will need to analyse them first because they look like scratches there fore I will have to pay for them l’m so annoyed because I got two differnt reasons as to what is wrong with them. This sucks. The lenses are about two or three years old, and I plan on getting them replaced anyways later this week. That would be some coatings on the lens starting to peel off. This coating is great if you’re worried about scratching your glasses or sunglasses, though we still recommend being careful. I llove my anti glare coating and am genuinely surprised by all the bad experiences reported here. 05/09/2012. CLEANING GLASSES - DON'TS. The worst part is that I just got my Juliet back from a tune up Again, this was another technique used to make less expensive glass look nice at an even lower cost to manufacturers. If you work around back-lit devices, you know that the glare off the screen shining across your eyes is a leading cause of end of day fatigue. The anti-reflective coating consists of layers of metal oxides applied to the front and back of glass, plastic or polycarbonate lenses. 0 0. AR coatings are about a lot more than how you look in photographs. This is not a major problem, just a cosmetic one. I have a pair of glasses where the coating is coming off (if I hold it up to the light, I can actually see specks where it's not there). But I was wondering what would cause the coating to come off like that. i decided to clean all the sweat and grim of my Juliet with ice polarized lense. You can see my photos in posts below. Lv 7. for being so stupid to fall for their marketing speak. I use my glasses all day every day at work. I felt like my eyeballs had been beaten up and violated. As Sunglass Rob says, “On your face or in the case, that way you won’t have to replace!” It’s also worth noting that getting a scratch-resistant coating often includes a … Most prescription eyeglasses have a protective coating. I brought it to the local store and got it fixed. Anti glare coating coating coming off glasses. As i type this im looking through lens that are now clear as new. Do this by rubbing acetone onto the lenses until the coating softens and rubs off. Source(s): https://shorten.im/a82pt.